Symptoms
An NTP client computer that is running Windows Server edtions or Windows Client editions may not correct the time if the following conditions are true:
Polling Office Windows 10 Faster Than 8 1
- You can create and send an email with a poll in Outlook as follows: 1. Click Home New Email to create a new email. In the new message window, please click Options Use Voting Buttons Custom. See screenshot: 3.
- Nov 05, 2020 The earliest call for additional Republican poll challengers was posted to Facebook at 7:27 a.m., according to The Times's analysis. 'Come to TCF Center,' read the post in a group called.
Helpful Tip: If you are presenting from a laptop or a desktop computer, it's best to use the standalone Poll Everywhere presentation app for Windows or Mac. If you need to present from PowerPoint on a tablet, the Poll Everywhere for Microsoft 365 add-in is a great secondary option. The Detroit Department of Elections had counted roughly 162,000 absentee ballots as of 2 p.m. Wednesday, Detroit Clerk Janice Winfrey's office said in a statement.
The NTP client syncs its time with the manually specified NTP server.
The NTP client uses SpecialPollInterval as a polling interval.
The time offset between the NTP client and the NTP server is greater than the LargePhaseOffset as configured in the NTP client.
In this situation, the NTP client cannot correct its time even after waiting for SpikeWatchPeriod to pass.
Cause
This problem occurs because the NTP client gets into SPIKE state every time the client polls the time sample to the NTP server. The Time service manages its internal status, and if the client gets into SPIKE state, the client does not sync its time.
Polling Office Windows 10 Faster On Internet
Resolution
To work around this issue so that the NTP client is enabled to sync with the NTP server after a SPIKE state, configure Windows Time to use the MinPollInterval/MaxPollInterval as the polling interval.
To have us configure Windows Time to use the MinPollInterval/MaxPollInterval as the polling interval for you, go to the 'Here's an easy fix' section. If you prefer to configure Windows Time to use the MinPollInterval/MaxPollInterval as the polling interval yourself, go to the 'Let me fix it myself' section.
Note If you set Windows Time Service's settings by Group Policy or Local Group Policy, this 'Easy fix' method does not work and you have to delete policy settings.
Here's an easy fix
To configure Windows Time to use the MinPollInterval/MaxPollInterval as the polling interval, click the Download button. In the File Download dialog box, click Run or Open, and then follow the steps in the easy fix wizard.
This wizard may be in English only. However, the automatic fix also works for other language versions of Windows.
If you're not on the computer that has the problem, save the easy fix solution to a flash drive or a CD, and then run it on the computer that has the problem.
For Windows 8.1, Windows Server 2012 R2 and later versions of Windows
For Windows 7, Windows Vista, Windows Server 2008 and Windows Server 2008 R2
Let me fix it myself
To configure Windows Time to use the MinPollInterval/MaxPollInterval as the polling interval, follow these steps:
Click Start, click Run, type cmd, and then press ENTER.
Note In Windows 8 or Windows Server 2012, press the Windows logo Key+R to open the Run box, type cmd in the Run box, and then press ENTER.At the command prompt, type the following command. After you type the command, press ENTER.
w32tm /config /update /manualpeerlist:NTP_server_IP_Address,0x8 /syncfromflags:MANUAL
Note When you use the 0x1 flag with the /manualpeerlist switch, you specify use of SpecialPollInterval. To work around this problem, do not use the 0x1 flag.
For Windows 7, Windows Vista, Windows Server 2008 and Windows Server 2008 R2
Let me fix it myself
To configure Windows Time to use the MinPollInterval/MaxPollInterval as the polling interval, follow these steps:
Click Start, click Run, type cmd, and then press ENTER.
Note In Windows 8 or Windows Server 2012, press the Windows logo Key+R to open the Run box, type cmd in the Run box, and then press ENTER.At the command prompt, type the following command. After you type the command, press ENTER.
w32tm /config /update /manualpeerlist:NTP_server_IP_Address,0x8 /syncfromflags:MANUAL
Note When you use the 0x1 flag with the /manualpeerlist switch, you specify use of SpecialPollInterval. To work around this problem, do not use the 0x1 flag.
Workaround
If you want to use 'SpecialPollinterval', you should change the following registry:
Key: HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesW32TimeConfig
Value: MinPollInterval
Type: DWORD
To avoid this issue, the registry key should apply conditional expression as follows:
Conditional expression:
SpecialPollInterval<(2^MinPollInterval)*(HoldPeriod+1)Domain member computer has default values:
MinPollInterval=10
HoldPeriod=5
Note If you set Windows Time Service's settings by Group Policy or Local Group Policy, this workaround does not work and you have to delete Policy settings.
Status
Microsoft has confirmed that this is a problem in the Microsoft products that are listed in the 'Applies to' section.
More Information
The polling interval that Windows Time uses is set by the following registry subkey:
HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesW32TimeParameters
If the value of the NtpServer entry in this subkey contains 0x1, Windows Time uses SpecialPollInterval as the polling interval. Otherwise, Windows Time uses MinPollInterval/MaxPollInterval. For additional Information about the Windows Time Service and registry values, visit the following Microsoft Web site:
